PRODUCT INTRODUCTION
Duct Fan
Product Detail
High capacity and reliability:
In-line centrifugal duct fan, type CK, is a straight-through radial fan. It is compact, with a high capacity and very easy to install. The CK fan can cope with high pressure and long duct runs, whilst still operating at an acceptable sound level. The fan speed can be controlled by voltage or frequency variation regulators. Several fans can be connected to the same controller providing the total nominal current of the fans does not exceed the rating of the controller. The CK ranges of fans are moisture resistant and are approved for installing in humid or damp environments. The fans are rated IP44 when installed in a duct system. They must not be used for transporting grinding dust, soot or similar. The casing is manufactured from pre-galvanized steel. Automatic thermo-contacts open if the temperature within the motor windings becomes excessive.
Accessories:
Duct clamps, mounting brackets, back-draught shutters, louver shutters, safety grills and speed controllers.
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
Duct Fan
Interview
Product Detail
High capacity and reliability:
In-line centrifugal duct fan, type CK, is a straight-through radial fan. It is compact, with a high capacity and very easy to install. The CK fan can cope with high pressure and long duct runs, whilst still operating at an acceptable sound level. The fan speed can be controlled by voltage or frequency variation regulators. Several fans can be connected to the same controller providing the total nominal current of the fans does not exceed the rating of the controller. The CK ranges of fans are moisture resistant and are approved for installing in humid or damp environments. The fans are rated IP44 when installed in a duct system. They must not be used for transporting grinding dust, soot or similar. The casing is manufactured from pre-galvanized steel. Automatic thermo-contacts open if the temperature within the motor windings becomes excessive.
Accessories:
Duct clamps, mounting brackets, back-draught shutters, louver shutters, safety grills and speed controllers.
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
Products
——
News
——
NUMBERS
T:+86 21 6089 8599
F:+86 21 6089 8599*6198
info@dma-marine.com
HEADQUARTER ADDRESS
No.180 Gangying Road, Pudong, Shanghai, China, 200137.
DAN MARINE GROUP [DMG]
DMA Marine. ALL rights reserved .2023
